John Deere Parts for Engines:-Engine Overhaul Kits| Crankshafts | Injectors| Cylinder Head | Water Pump | Valve Train Kit | Oil Pump | Gasket Sets

Attention: Farmers & Mechanics!!!
Need John Deere 4219 Engine Parts?
You Can Benefit from:

  1. The Largest Online New Aftermarket Parts Store in the USA-95,000 part numbers and growing
  2. Seeing Pictures, Prices, Descriptions, and Availability before you buy
  3. Paying Up to 50% less that Dealer Prices
  4. The lowest freight rates from UPS, DHL, and other couriers.

    Use The Part Numbers Below and Enter It Into the Online Shopping Cart to See Prices or Call Easy Tractor Parts 1-877-668-7278 or
    Click the Image Below to Enter the
    John Deere Parts Catalog

    Tractor-Parts-CatalogJohn Deere Parts for 4219 Engine for Engine Serial Number less than (<) 154765

    Notes. The 4219 engine is part of the 300 Series John Deere Engines manufactured in Saran, France and in Dubuque in Iowa, USA. For serial numbers less that 154865, the liner o rings are fixed on the liners. This is a 3 cylinder engine, with a bore of 3.86 inches (98mm), and a piston pin diameter of 1.185 inches (30mm).
    The engine block will have casting numbers of T24963 or T26935, and the connecting rods will have casting numbers of T20007 or R81410.
    This engine is found on John Deere 820, 1020 and 1030 Tractors, and the 300, 300A backhoe, the 350A and 350B dozer and the 380 Forklift.
    Major Part Description Sub Component Description Part Number Part Contents and Description
    John Deere Engine Overhaul Kits Complete Engine Overhaul Kit OK4310 Comes with Pistons, Pins, Pin Retainers, Rings, Liners, Liner O Rings, Cam Shaft bushings, Main Bearings, Thrust Bearings, Con Rod Bearings, Rear & Front Crank Seal, Complete Gasket Set, cap screws and injector grommets.
    In frame Overhaul Kit IK4310 Comes with Pistons, Pins, Pin Retainers, Rings, Liners, Liner O Rings, Main Bearings, Thrust Bearings, Con Rod Bearings, head gasket set, oil pan gasket & cap screws.
    John Deere Engine Parts Piston Liner Kit PLK310 Consists of
    Pistons AR78310
    Rings AR55759
    Piston Pins T26149
    Liners AR51903
    Piston Pin Retainers R51112
    Main Bearing RE27352 Standard
    RE27353 0.010 Oversize
    RE27360 0.020 Oversize
    RE27368 0.030 Oversize
    Thrust Bearing AT21139 Standard
    AT21132 0.010 Oversize
    AT21134 0.020 Oversize
    AT21136 0.030 Oversize
    Con Rod Bearings RE27348 Standard
    RE27349 0.010 Oversize
    RE27358 0.020 Oversize
    RE27364 0.030 Oversize
    John Deere Crankshaft Kit Front Seal AR67942
    Rear Seal RE44574 Do no use with Flywheel Housing with casting # T20300 & T22991
    Crankshaft AT18031
    Crankshaft Gear T20094
    Ring Gear R114282 142 teeth
    John Deere Con Rods Parts Con Rod Bush T23471 x4
    Con Rod Bolt R74194 x8 Use R74194 with con rod casting # T20007, use R80033 with con rod casting # R81410
    Bal. Shaft Bush R57160 x6 TR19708 (Outer Diameter 2.00mm/0.078in) Larger and R51760R (inner diameter 0.5mm/0.020in) Smaller are also available.
    Bal. Shaft R/H RE26282 R/H
    Bal. Shaft L/H RE26283 L/H
    Camshaft R82820
    Bal. Shaft Stop R88112
    Con Rod AT18005
    John Deere Oil Pump Parts Oil Pump RE55343
    Oil Cooler RE31929
    Rocker Arm RE31973
    Rocker Shaft R54987
    Oil Pump Tube R113752
    John Deere Engine Gears Lower Gear AT24252
    Lower Bushing T26321
    Upper Gear AT18009
    Upper Bushing T20034
    Cam Follower T20073
    Cam Gear T20070
    John Deere Valve Train Parts Intake Valve R79623 Standard
    R79628 0.003 Oversize
    R79629 0.015 oversize
    Exhaust Valve R79624 Standard
    R79625 0.003 Oversize
    R79626 0.015 oversize
    Intake Valve Insert R73064 Standard
    Exhaust Valve Insert R51734 Standard
    Valve Cap R20129
    Valve Lock R20077
    Valve Spring R26125
    Valve Rotator RE11410
    Valve Seal (O Ring) R87627
    Other John Deere Engine Parts Thermostat RE33705 180oF Do no use this thermostat with a housing that has the following casting #’s R70741, R74549 and R54096
    Thermostat Cover T23620
    Fuel Transfer Pump RE42211
    Water Pump Repair Kit RE19507 Water pump Kit has no Impeller
    RE62658 Water Pump Kit has Impeller
    Water Pump AT27018 (m) R48997, (m) R551039
    Pencil Injector AR89564
    Seal R60746
    R48000

    John Deere Parts for 4219 Engine for Engine Serial Number more than (>) 154766

Notes. The 4219 engine is part of the 300 Series John Deere Engines manufactured in Saran, France and in Dubuque in Iowa, USA. For serial numbers less that 154865, the liner o rings are fixed on the liners. This is a 3 cylinder engine, with a bore of 3.86 inches (98mm), and a piston pin diameter of 1.185 inches (30mm).
The engine block will have casting numbers of T24963 or T26935, and the connecting rods will have casting numbers of T20007 or R81410.
This engine is found on John Deere 820, 1020 and 1030 Tractors, and the 300, 300A backhoe, the 350A and 350B dozer and the 380 Forklift.
Major Part Description Sub Component Description Part Number Part Contents and Description
John Deere Engine Overhaul Kits Complete Engine Overhaul Kit OK4593 Comes with Pistons, Pins, Pin Retainers, Rings, Liners, Liner O Rings, Cam Shaft bushings, Main Bearings, Thrust Bearings, Con Rod Bearings, Rear & Front Crank Seal, Complete Gasket Set, cap screws and injector grommets.
In frame Overhaul Kit IK4593 Comes with Pistons, Pins, Pin Retainers, Rings, Liners, Liner O Rings, Main Bearings, Thrust Bearings, Con Rod Bearings, head gasket set, oil pan gasket & cap screws.
John Deere Engine Parts Piston Liner Kit AR71593 Consists of
Pistons AR78310
Rings AR55759
Piston Pins T26149
Liners R116463
AR71618
Piston Pin Retainers R51112
Main Bearing RE27352 Standard
RE27353 0.010 Oversize
RE27360 0.020 Oversize
RE27368 0.030 Oversize
Thrust Bearing AT21139 Standard
AT21132 0.010 Oversize
AT21134 0.020 Oversize
AT21136 0.030 Oversize
Con Rod Bearings RE27348 Standard
RE27349 0.010 Oversize
RE27358 0.020 Oversize
RE27364 0.030 Oversize
John Deere Crankshaft Kit Front Seal AR67942
Rear Seal RE44574 Do no use with Flywheel Housing with casting # T20300 & T22991
Crankshaft AT18030
Crankshaft Gear T20094
Ring Gear R114282 142 teeth
John Deere Con Rods Parts Con Rod Bush T23471 x4
Con Rod Bolt R74194 x8 Use R74194 with con rod casting # T20007, use R80033 with con rod casting # R81410
Bal. Shaft Bush R57160 x6 TR19708 (Outer Diameter 2.00mm/0.078in) Larger and R51760R (inner diameter 0.5mm/0.020in) Smaller are also available.
Bal. Shaft R/H RE26282 R/H
Bal. Shaft L/H RE26283 L/H
Camshaft R82820
Bal. Shaft Stop R88112
Con Rod AT18005
John Deere Oil Pump Parts Oil Pump RE55343
Oil Cooler RE31929
Rocker Arm RE31973
Rocker Shaft R54987
Oil Pump Tube R113752
John Deere Engine Gears Lower Gear AT24252
Lower Bushing T26321
Upper Gear AT18009
Upper Bushing T20034
Cam Follower T20073
Cam Gear T20070
John Deere Valve Train Parts Intake Valve R79623 Standard
R79628 0.003 Oversize
R79629 0.015 oversize
Exhaust Valve R79624 Standard
R79625 0.003 Oversize
R79626 0.015 oversize
Intake Valve Insert R73064 Standard
Exhaust Valve Insert R51734 Standard
Valve Cap R20129
Valve Lock R20077
Valve Spring R26125
Valve Rotator RE11410
Valve Seal (O Ring) R87627
Other John Deere Engine Parts Thermostat RE33705 180oF Do no use this thermostat with a housing that has the following casting #’s R70741, R74549 and R54096
Thermostat Cover T23620
Fuel Transfer Pump RE42211
Water Pump Repair Kit RE19507 Water pump Kit has no Impeller
RE62658 Water Pump Kit has Impeller
Water Pump AT27018 (m) R48997, (m) R551039
Pencil Injector AR89564
Seal R60746
R48000

John Deere Parts for 4219 Engine for Engine Serial Number more than (>) 275484

 

Notes. The 4219 engine is part of the 300 Series John Deere Engines manufactured in Saran, France and in Dubuque in Iowa, USA. For serial numbers less that 154865, the liner o rings are fixed on the liners. This is a 3 cylinder engine, with a bore of 3.86 inches (98mm), and a piston pin diameter of 1.185 inches (30mm).
The engine block will have casting numbers of T24963 or T26935, and the connecting rods will have casting numbers of T20007 or R81410.
This engine is found on John Deere 820, 1020 and 1030 Tractors, and the 300, 300A backhoe, the 350A and 350B dozer and the 380 Forklift.
Major Part Description Sub Component Description Part Number Part Contents and Description
John Deere Engine Overhaul Kits Complete Engine Overhaul Kit AT86984 Comes with Pistons, Pins, Pin Retainers, Rings, Liners, Liner O Rings, Cam Shaft bushings, Main Bearings, Thrust Bearings, Con Rod Bearings, Rear & Front Crank Seal, Complete Gasket Set, cap screws and injector grommets.
In frame Overhaul Kit IK86984 Comes with Pistons, Pins, Pin Retainers, Rings, Liners, Liner O Rings, Main Bearings, Thrust Bearings, Con Rod Bearings, head gasket set, oil pan gasket & cap screws.
John Deere Engine Parts Piston Liner Kit AR78041 Consists of
Pistons AR77762
Rings AR55759
Piston Pins R125754
Liners R116463
AR71618
M41029
Main Bearing RE27352 Standard
RE27353 0.010 Oversize
RE27360 0.020 Oversize
RE27368 0.030 Oversize
Thrust Bearing AT21139 Standard
AT21132 0.010 Oversize
AT21134 0.020 Oversize
AT21136 0.030 Oversize
Con Rod Bearings RE27348 Standard
RE27349 0.010 Oversize
RE27358 0.020 Oversize
RE27364 0.030 Oversize
John Deere Crankshaft Kit Front Seal AR67942
Rear Seal RE44574 Do no use with Flywheel Housing with casting # T20300 & T22991
Crankshaft AT18030
Crankshaft Gear T20094
Ring Gear R114282 142 teeth
John Deere Gasket Set O/H Gasket Set RE501579
Head Gasket Set RE38851
Head Gasket R125863
Oil Pan Gasket R97342
Rocker Cover Gasket R73521
John Deere Con Rods Parts Con Rod Bush R55647 x4
Con Rod Bolt R74194 x8 Use R74194 with con rod casting # T20007, use R80033 with con rod casting # R81410
Bal. Shaft Bush R57160 x6 TR19708 (Outer Diameter 2.00mm/0.078in) Larger and R51760R (inner diameter 0.5mm/0.020in) Smaller are also available.
Bal. Shaft R/H RE26282 R/H
Bal. Shaft L/H RE26283 L/H
Camshaft R82820
Bal. Shaft Stop R88112
Con Rod RE16495
John Deere Oil Pump Parts Oil Pump RE55343
Oil Cooler RE31929
Rocker Arm RE31973
Rocker Shaft R54987
Oil Pump Tube R113752
John Deere Engine Gears Lower Gear AT24252
Lower Bushing T26321
Upper Gear AT18009
Upper Bushing T20034
Cam Follower T20073
Cam Gear T20070
John Deere Valve Train Parts Intake Valve R79623 Standard
R79628 0.003 Oversize
R79629 0.015 oversize
Exhaust Valve R79624 Standard
R79625 0.003 Oversize
R79626 0.015 oversize
Intake Valve Insert R73064 Standard
Exhaust Valve Insert R51734 Standard
Valve Cap R20129
Valve Lock R20077
Valve Spring R26125
Valve Rotator RE11410
Valve Seal (O Ring) R87627
Other John Deere Engine Parts Thermostat RE33705 180oF Do no use this thermostat with a housing that has the following casting #’s R70741, R74549 and R54096
Thermostat Cover T23620
Fuel Transfer Pump RE42211
Water Pump Repair Kit RE19507 Water pump Kit has no Impeller
RE62658 Water Pump Kit has Impeller
Water Pump AT27018 (m) R48997, (m) R551039
Pencil Injector AR89564
Seal R60746
R48000