John Deere Parts
John Deere Parts for Tractors, Engines, Combines, Trimmer, Swather, Skidder, Skid Steer, Baler, Rake, Header, Harvester, Compact Tractor.
Attention: Farmers & Mechanics!!!
Need John Deere Parts?
You Can Benefit from:
- The Largest Online New Aftermarket Parts Store in the USA-95,000 part numbers and growing
- Seeing Pictures, Prices, Descriptions, and Availibility before you buy
- Paying Up to 50% less that Dealer Prices
- The lowest freight rates from UPS, DHL, and other couriers.
Call Easy Tractor Parts 1-877-668-7278 or
Click the Image Below to Enter the
John Deere Parts Catalog
John Deere Parts Combines
John Deere Parts Industrial
John Deere Parts Walk Behind Mower
John Deere Parts Utility Vehicle
John Deere Parts Trimmer
John Deere Parts Tiller
John Deere Parts Swather
John Deere Parts Square Baler
John Deere Parts Sprayer
John Deere Parts Snow Blower
John Deere Parts Skidder
John Deere Parts Skid Steer
John Deere Parts Round Baler
John Deere Parts Rotary Mower
John Deere Parts Riding Mower
John Deere Parts Rake
John Deere Parts Mower Deck
John Deere Parts Mower Conditioner
John Deere Parts Mower
John Deere Parts Draper Header
John Deere Parts Auger Header
John Deere Parts Header
John Deere Parts Forage Harvester
John Deere Parts Disc Mower
John Deere Parts Disc Harrow
John Deere Parts Cotton Stripper
John Deere Parts Cotton Picker
John Deere Parts Corn Head
John Deere Parts Compact Tractor
John Deere Parts Tractors
John Deere Parts Engines
John Deere Parts Cutting Platform
John Deere Parts for Engines:-Engine Overhaul Kits| Crankshafts | Injectors| Cylinder Head | Water Pump | Valve Train Kit | Oil Pump | Gasket Sets
John Deere Parts for 6081(8.1L) Engine. High Compression Pistons
| Notes. The 6081(8.1L) engine is part of the Powertech John Deere Engines manufactured. This is a 6 cylinder engine, with a bore of 4.56 inches (116mm), and a piston pin diameter of 1.85 inches (47 mm). The connecting rods will have casting numbers of R116340 (serial numbers more than 86,536) or R501034 (serial numbers less than 86,537). This engine is used in various equipment including wheel loaders, dozer, motor graders, marine engines and generators. |
|||
| Major Part Description | Sub Component Description | Part Number | Part Contents and Description |
| John Deere Engine Overhaul Kits | Complete Engine Overhaul Kit | OK504201 IK504201 |
Comes with Pistons, Pins, Pin Retainers, Rings, Liners, Liner O Rings, Cam Shaft bushings, Main Bearings, Thrust Bearings, Con Rod Bearings, Rear & Front Crank Seal, Complete Gasket Set, cap screws and injector grommets. |
| John Deere Engine Parts | Piston Liner Kit | RE64509 | Consists of Pistons RE70688 Rings RE503528 Piston Pins R57771 Liners R116236 Piston Pin Retainers AR98850 E1343FN |
| Main Bearing | RE504195 | Standard | |
| RE504196 | 0.011 Oversize | ||
| Thrust Bearing | RE504198 | Standard | |
| RE504199 | 0.011 Oversize | ||
| Thrust Washer | RE61253 | Standard | |
| Con Rod Bearings | R116081 | Standard | |
| RE57167 | 0.011 Oversize | ||
| John Deere Crankshaft Kit | Front Seal | AR49025 | |
| Rear Seal | RE520036 | ||
| Crankshaft Gear | R104587 | ||
| Crankshaft | RE535300 | With helical oil pump drive gear. Do not use on engines with HPCR fuel system. | |
| OR | |||
| RE534314 | With straight oil pump drive gear. Do not use on engines with HPCR fuel system. | ||
| Ring Gear | R28811 | ||
| John Deere Gasket Set | O/H Gasket Set | RE506220 | |
| Head Gasket Set | RE506222 | ||
| Head Gasket | RE55475 | ||
| Oil Pan Gasket | R71918 | With Cast Iron Oil Pan use R49377 (RE504822). | |
| John Deere Con Rods Parts | Con Rod Bush | R74008 | x6 |
| Con Rod Bolt | R66452 | x12 Use R114083 Rod Bolts with Machine Split Connecting Rods, and use R501124 Rod Bolts with Fractured Split Connecting Rods. | |
| Cam Bushing | R87561 | x4 | |
| Plug Camshaft | R82007 | ||
| Oil Cooler | AR55394 | ||
| Tappet | R110126 | ||
| Oil Pump | RE60622 | ||
| Tensioner Belt | RE518097 | ||
| John Deere Valve Train Parts | Intake Valve | R84618 | Standard |
| R93308 | 0.003 oversize | ||
| R93312 | 0.015 oversize | ||
| Exhaust Valve | R84619 | Standard | |
| R93311 | 0.003 oversize | ||
| R93313 | 0.015 oversize | ||
| Intake Valve Insert | R121193 | ||
| Exhaust Valve Insert | R119132 | Standard | |
| Valve Cap | T20129 | ||
| Valve Lock | T20077 | ||
| Valve Shield | R102882 | x6 For Exhaust Valves only. | |
| Other John Deere Engine Parts | Thermostat | AR48675 | 180oF |
| Fuel Transfer Pump | RE66153 | For Tier 2 HPCR Fuel System. | |
John Deere Parts for 6081(8.1L) Engine. Low Compression Pistons
| Notes. The 6081(8.1L) engine is part of the Powertech John Deere Engines manufactured. This is a 6 cylinder engine, with a bore of 4.56 inches (116mm), and a piston pin diameter of 1.85 inches (47 mm). The connecting rods will have casting numbers of R116340 (serial numbers more than 86,536) or R501034 (serial numbers less than 86,537). This engine is used in various equipment including wheel loaders, dozer, motor graders, marine engines and generators. |
|||
| Major Part Description | Sub Component Description | Part Number | Part Contents and Description |
| John Deere Engine Overhaul Kits | Complete Engine Overhaul Kit | OK504202 IK504202 |
Comes with Pistons, Pins, Pin Retainers, Rings, Liners, Liner O Rings, Cam Shaft bushings, Main Bearings, Thrust Bearings, Con Rod Bearings, Rear & Front Crank Seal, Complete Gasket Set, cap screws and injector grommets. |
| John Deere Engine Parts | Piston Liner Kit | RE508156 | Consists of Pistons RE70689 Rings RE503528 Piston Pins R57771 Liners R116236 Piston Pin Retainers AR98850 E1343FN |
| Main Bearing | RE504195 | Standard | |
| RE504196 | 0.011 Oversize | ||
| Thrust Bearing | RE504198 | Standard | |
| RE504199 | 0.011 Oversize | ||
| Thrust Washer | RE61253 | Standard | |
| Con Rod Bearings | R116081 | Standard | |
| RE57167 | 0.011 Oversize | ||
| John Deere Crankshaft Kit | Front Seal | AR49025 | |
| Rear Seal | RE520036 | ||
| Crankshaft Gear | R104587 | ||
| Crankshaft | RE535300 | With helical oil pump drive gear. Do not use on engines with HPCR fuel system. | |
| OR | |||
| RE534314 | With straight oil pump drive gear. Do not use on engines with HPCR fuel system. | ||
| Ring Gear | R28811 | ||
| Rear Gear | R63326 | ||
| John Deere Gasket Set | O/H Gasket Set | RE506220 | |
| Head Gasket Set | RE506222 | ||
| Head Gasket | RE55475 | ||
| Oil Pan Gasket | R71918 | With Cast Iron Oil Pan use R49377 (RE504822). | |
| John Deere Con Rods Parts | Con Rod Bush | R74008 | x6 |
| Con Rod Bolt | R66452 | x12 Use R114083 Rod Bolts with Machine Split Connecting Rods, and use R501124 Rod Bolts with Fractured Split Connecting Rods. | |
| Cam Bushing | R87561 | x4 | |
| Plug Camshaft | R82007 | ||
| Oil Cooler | AR55394 | ||
| Tappet | R110126 | ||
| Oil Pump | RE60622 | ||
| Tensioner Belt | RE518097 | ||
| John Deere Valve Train Parts | Intake Valve | R84618 | Standard |
| R93308 | 0.003 oversize | ||
| R93312 | 0.015 oversize | ||
| Exhaust Valve | R84619 | Standard | |
| R93311 | 0.003 oversize | ||
| R93313 | 0.015 oversize | ||
| Intake Valve Insert | R121193 | ||
| Exhaust Valve Insert | R119132 | Standard | |
| Valve Cap | T20129 | ||
| Valve Lock | T20077 | ||
| Valve Shield | R102882 | x6 For Exhaust Valves only. | |
| Spring Valve | R91822 | ||
| Rotator Valve | RE11410 | ||
| Other John Deere Engine Parts | Thermostat | AR48675 | 180oF |
| Fuel Transfer Pump | RE66153 | For Tier 2 HPCR Fuel System. | |
John Deere Parts for Engines:-Engine Overhaul Kits| Crankshafts | Injectors| Cylinder Head | Water Pump | Valve Train Kit | Oil Pump | Gasket Sets
John Deere Parts for 6068D(6.8D) Engine
| Notes. The 6068D(6.8D) engine is part of the Powertech John Deere Engines manufactured. This is a 6 cylinder engine, with a bore of 4.19 inches (106.5 mm), and a piston pin diameter of 1.375 inches (35mm). The pistons will have casting numbers of RE59279, and RE505101, the connecting rods will have casting numbers of RE123959 and R500000. This engine is found on John Deere 6205, 6505, 6510, SE6510, 6515, 6520, and the SE6520 Tractors, and 6.8 L OEM engines used in Power Units, marine engines and other equipment. |
|||
| Major Part Description | Sub Component Description | Part Number | Part Contents and Description |
| John Deere Engine Overhaul Kits | Complete Engine Overhaul Kit | RE66095 RE66095A |
Comes with Pistons, Pins, Pin Retainers, Rings, Liners, Liner O Rings, Cam Shaft bushings, Main Bearings, Thrust Bearings, Con Rod Bearings, Rear & Front Crank Seal, Complete Gasket Set, cap screws and injector grommets. (*)(*)w/C. Rod R500000 |
| In frame Overhaul Kit | IK66095 IK66095A |
Comes with Pistons, Pins, Pin Retainers, Rings, Liners, Liner O Rings, Main Bearings, Thrust Bearings, Con Rod Bearings, head gasket set, oil pan gasket & cap screws. (*)(*)w/C. Rod 500000 |
|
| John Deere Engine Parts | Piston Liner Kit | RE65966 (RE505110) |
Consists of Pistons RE59279 Rings RE66271 Piston Pins R123178 Liners R116383 Piston Pin Retainers AR65507 M41029 |
| Main Bearing | RE65165 | Standard | |
| RE65911 | 0.010 Oversize | ||
| Thrust Bearing | RE65168 | Standard | |
| RE65912 | 0.010 Oversize | ||
| Con Rod Bearings | RE65908 | Standard | |
| RE65909 | 0.010 Oversize | ||
| John Deere Crankshaft Kit | Front Seal | RE505515 | 1 Piece Unitized Seal and Wearsleeve; Replaces RE59810, RE538097. |
| Rear Seal | RE44574 | ||
| Crankshaft | RE52850 | ||
| Ring Gear | R28811 | 129 teeth | |
| OR | |||
| R114282 | 142 teeth | ||
| Seal | H35244 | ||
| John Deere Gasket Set | O/H Gasket Set | RE501456 | |
| Head Gasket Set | RE66085 | ||
| Head Gasket | R116516 | ||
| Oil Pan Gasket | R123354 | ||
| Rocker Cover Gasket | R123543 | ||
| John Deere Con Rods Parts | Con Rod Bush | R123960 | x6 |
| Con Rod Bolt | R114083 R501124 |
x12 Use R114083 Rod Bolts with Machine Split Connecting Rods, and use R501124 Rod Bolts with Fractured Split Connecting Rods. | |
| Cam Bushing | R119874 | x1 | |
| Cyl. Hd Cap Screw | R85363 | x26 Replace all R78558 Cap Screws with Flanged Head Cap Screw R85363. | |
| Tappet | R123565 | x12 | |
| Tensioner Belt | RE518097 | ||
| Con Rod | RE500002 | (m R500,000) | |
| John Deere Oil Pump Parts | Water Pump | RE500737 | Standard Flow |
| RE500734 | High Flow | ||
| Water Pump Cov | RE508566 | ||
| Water Pump Gsk | R123417 | ||
| Oil Pump | RE504914 | ||
| John Deere Valve Train Parts | Intake Valve | R98062 | Standard |
| R97490 | 0.015 oversize | ||
| Exhaust Valve | R90692 | Standard | |
| R97492 | 0.015 oversize | ||
| Intake Valve Insert | R98063 | Standard | |
| R98335 | O/S | ||
| Exhaust Valve Insert | R85687 | Standard | |
| R93910 | O/S | ||
| Valve Seal | RE31617 | ||
| Valve Lock | R91889 | ||
| Spring Valve | R26125 | ||
| Rotator Valve | RE60005 | ||
| Other John Deere Engine Parts | Thermostat | RE64354 | 180oF |
| Fuel Transfer Pump | RE68345 | ||
| OR | |||
| RE66513 | Line connections are both threaded. | ||
| Injector Pencil | RE60062 | Non Turbo | |
| RE48786 | Turbo | ||
| RE534136 | Use with Stanadybe DE10 Injection Pump. | ||
| Seal | R92352 | ||
| R48000 | |||
John Deere Parts for 6068T(6.8T) Engine
| Notes. The 6068T(6.8T) engine is part of the Powertech John Deere Engines manufactured. This is a 6 cylinder engine, with a bore of 4.19 inches (106.5 mm), and a piston pin diameter of 1.375 inches (35mm). The pistons will have casting numbers of RE59277, and RE505100, the connecting rods will have casting numbers of RE123959 and R500000. This engine is found on John Deere 6603, 7455, 7460, and the 9935 Tractors, the 6.8 L OEM engines used in Power Units, marine engines and other equipment, and 670C, 670CH grader, and 700H, 700J crawler dozer. |
|||
| Major Part Description | Sub Component Description | Part Number | Part Contents and Description |
| John Deere Engine Overhaul Kits | Complete Engine Overhaul Kit | RE66096 RE66096A |
Comes with Pistons, Pins, Pin Retainers, Rings, Liners, Liner O Rings, Cam Shaft bushings, Main Bearings, Thrust Bearings, Con Rod Bearings, Rear & Front Crank Seal, Complete Gasket Set, cap screws and injector grommets. (*)(*)w/C. Rod R500000 |
| In frame Overhaul Kit | IK66096 IK66096A |
Comes with Pistons, Pins, Pin Retainers, Rings, Liners, Liner O Rings, Main Bearings, Thrust Bearings, Con Rod Bearings, head gasket set, oil pan gasket & cap screws. (*)(*)w/C. Rod 500000 |
|
| John Deere Engine Parts | Piston Liner Kit | RE507920 (RE505111) |
Consists of Pistons RE59277 Rings RE66271 Piston Pins R123178 Liners R116383 Piston Pin Retainers AR65507 M41029 |
| Main Bearing | RE65165 | Standard | |
| RE65911 | 0.010 Oversize | ||
| Thrust Bearing | RE65168 | Standard | |
| RE65912 | 0.010 Oversize | ||
| Con Rod Bearings | RE65908 | Standard | |
| RE65909 | 0.010 Oversize | ||
| John Deere Crankshaft Kit | Front Seal | RE505515 | 1 Piece Unitized Seal and Wearsleeve; Replaces RE59810, RE538097. |
| Rear Seal | RE44574 | ||
| Crankshaft | RE52850 | ||
| Ring Gear | R28811 | 129 teeth | |
| OR | |||
| R114282 | 142 teeth | ||
| Seal | H35244 | ||
| John Deere Gasket Set | O/H Gasket Set | RE501456 | |
| Head Gasket Set | RE66085 | ||
| Head Gasket | R116516 | ||
| Oil Pan Gasket | R123354 | ||
| Rocker Cover Gasket | R123543 | ||
| John Deere Con Rods Parts | Con Rod Bush | R123960 | x6 |
| Con Rod Bolt | R114083 R501124 |
x12 Use R114083 Rod Bolts with Machine Split Connecting Rods, and use R501124 Rod Bolts with Fractured Split Connecting Rods. | |
| Cam Bushing | R119874 | x1 | |
| Cyl. Hd Cap Screw | R85363 | x26 Replace all R78558 Cap Screws with Flanged Head Cap Screw R85363. | |
| Tappet | R123565 | x12 | |
| Tensioner Belt | RE518097 | ||
| Con Rod | RE500002 | (m R500,000) | |
| John Deere Oil Pump Parts | Water Pump | RE500737 | Standard Flow |
| RE500734 | High Flow | ||
| Water Pump Cov | RE508566 | ||
| Water Pump Gsk | R123417 | ||
| Oil Pump | RE504914 | ||
| John Deere Valve Train Parts | Intake Valve | R98062 | Standard |
| R97490 | 0.015 oversize | ||
| Exhaust Valve | R90692 | Standard | |
| R97492 | 0.015 oversize | ||
| Intake Valve Insert | R98063 | Standard | |
| R98335 | O/S | ||
| Exhaust Valve Insert | R85687 | Standard | |
| R93910 | O/S | ||
| Valve Seal | RE31617 | ||
| Valve Lock | R91889 | ||
| Spring Valve | R26125 | ||
| Rotator Valve | RE60005 | ||
| Other John Deere Engine Parts | Thermostat | RE64354 | 180oF |
| Fuel Transfer Pump | RE68345 | ||
| OR | |||
| RE66513 | Line connections are both threaded. | ||
| Injector Pencil | RE60062 | Non Turbo | |
| RE48786 | Turbo | ||
| RE534136 | Use with Stanadybe DE10 Injection Pump. | ||
| Seal | R92352 | ||
| R48000 | |||
John Deere Parts for 6068T/H(6.8T/H) Engine
| Notes. The 6068T/H(6.8T/H) engine is part of the Powertech John Deere Engines manufactured. This is a 6 cylinder engine, with a bore of 4.19 inches (106.5 mm), and a piston pin diameter of 1.375 inches (35mm).
The pistons will have casting numbers of RE55512 or RE505102, the connecting rods will have casting numbers of R114081 or R500335. This engine is found on John Deere 4700, 6605, 6615, 6715, 7210, 7405, 7410, 7510, 7610, 9410 Tractors, the 6.8 L OEM engines used in Power Units, marine engines and other equipment, 200LL, 200LC, 230LC, 270LC excavators, 540G, 540 GLL, 544H, 544HLL, TC544H, 548G, 624H, 624HLL, TC624H, 698G wheel loaders, 640G, 643G, 648G, 648 skidder, 670C, 670CH, 672CH motor grader, 710D, 843G, and 850G crawler dozer. |
|||
| Major Part Description | Sub Component Description | Part Number | Part Contents and Description |
| John Deere Engine Overhaul Kits | Complete Engine Overhaul Kit | RE66097 RE66097A |
Comes with Pistons, Pins, Pin Retainers, Rings, Liners, Liner O Rings, Cam Shaft bushings, Main Bearings, Thrust Bearings, Con Rod Bearings, Rear & Front Crank Seal, Complete Gasket Set, cap screws and injector grommets. (*)(*)w/C. Rod R500335 |
| In frame Overhaul Kit | IK66097 IK66097A |
Comes with Pistons, Pins, Pin Retainers, Rings, Liners, Liner O Rings, Main Bearings, Thrust Bearings, Con Rod Bearings, head gasket set, oil pan gasket & cap screws. (*)(*)w/C. Rod 500335 |
|
| John Deere Engine Parts | Piston Liner Kit | RE507850 (RE505112) |
Consists of Pistons RE55512 Rings RE66820 Piston Pins R123177 Liners R116383 Piston Pin Retainers AR65507 R54114 |
| Main Bearing | RE65165 | Standard | |
| RE65911 | 0.010 Oversize | ||
| Thrust Bearing | RE65168 | Standard | |
| RE65912 | 0.010 Oversize | ||
| Con Rod Bearings | RE65908 | Standard | |
| RE65909 | 0.010 Oversize | ||
| John Deere Crankshaft Kit | Front Seal | RE505515 | Use with Stanadybe DE10 Injection Pump. |
| Rear Seal | RE44574 | ||
| Crankshaft | RE52850 | ||
| Ring Gear | R28811 | 129 teeth | |
| OR | |||
| R114282 | 142 teeth | ||
| Seal | H35244 | ||
| John Deere Gasket Set | O/H Gasket Set | RE501456 | |
| Head Gasket Set | RE66085 | ||
| Head Gasket | R116516 | ||
| Oil Pan Gasket | R123354 | ||
| Rocker Cover Gasket | R123543 | ||
| John Deere Con Rods Parts | Con Rod Bush | R114082 | x6 |
| Con Rod Bolt | R114083 R501124 |
x12 Use R114083 Rod Bolts with Machine Split Connecting Rods, and use R501124 Rod Bolts with Fractured Split Connecting Rods. | |
| Cam Bushing | R119874 | x1 | |
| Cyl. Hd Cap Screw | R85363 | x26 Replace all R78558 Cap Screws with Flanged Head Cap Screw R85363. | |
| Tappet | R123565 | x12 | |
| Tensioner Belt | RE518097 | ||
| Con Rod | RE500608 | (m R500,335) | |
| John Deere Oil Pump Parts | Water Pump | RE500737 | Standard Flow |
| RE500734 | High Flow | ||
| Water Pump Cov | RE508566 | ||
| Water Pump Gsk | R123417 | ||
| Oil Pump | RE504914 | ||
| John Deere Valve Train Parts | Intake Valve | R98062 | Standard |
| R97490 | 0.015 oversize | ||
| Exhaust Valve | R90692 | Standard | |
| R97492 | 0.015 oversize | ||
| Intake Valve Insert | R98063 | Standard | |
| R98335 | O/S | ||
| Exhaust Valve Insert | R85687 | Standard | |
| R93910 | O/S | ||
| Valve Seal | RE31617 | ||
| Valve Lock | R91889 | ||
| Spring Valve | R26125 | ||
| Rotator Valve | RE60005 | ||
| Other John Deere Engine Parts | Thermostat | RE64354 | 180oF |
| Fuel Transfer Pump | RE68345 | ||
| OR | |||
| RE66513 | Line connections are both threaded. | ||
| Injector Pencil | RE60062 | Non Turbo | |
| RE48786 | Turbo | ||
| RE534136 | Use with Stanadybe DE10 Injection Pump. | ||
| Seal | R92352 | ||
| R48000 | |||
John Deere Parts for Engines:-Engine Overhaul Kits| Crankshafts | Injectors| Cylinder Head | Water Pump | Valve Train Kit | Oil Pump | Gasket Sets
John Deere Parts for 4045D(4.5D) Engine
| Notes. The 4045D(4.5D) engine is part of the Powertech Series John Deere Engines. This is a 4 cylinder engine, with a bore of 4.19 inches (106.5 mm), and a piston pin diameter of 1.375 inches (35 mm). The piston will have casting numbers ofRE59279 or RE505101, and the connecting rods will have casting numbers of R123959 or R500000. This engine is found on John Deere 5410, 5415, 5420, 5420N, 5510, 5615, 5715, 6010, 6110, and 6610 Tractors, the OEM 4.5 L engines used in power units and marine engines, and the 210LE, 310E Skidder, 450H loader, 485E, 486E, 488E Forklift, and the 550H and 650H dozers. |
|||
| Major Part Description | Sub Component Description | Part Number | Part Contents and Description |
| John Deere Engine Overhaul Kits | Complete Engine Overhaul Kit | RE66092 RE66092A |
Comes with Pistons, Pins, Pin Retainers, Rings, Liners, Liner O Rings, Cam Shaft bushings, Main Bearings, Thrust Bearings, Con Rod Bearings, Rear & Front Crank Seal, Complete Gasket Set, cap screws and injector grommets. (*)(*)w/C. Rod R500000 |
| In frame Overhaul Kit | IK66092 IK66092A |
Comes with Pistons, Pins, Pin Retainers, Rings, Liners, Liner O Rings, Main Bearings, Thrust Bearings, Con Rod Bearings, head gasket set, oil pan gasket & cap screws. (*)(*)w/C. Rod 500000 |
|
| John Deere Engine Parts | Piston Liner Kit | RE65966 (RE505110) |
Consists of Pistons RE59279 Rings RE66271 Piston Pins R123178 Liners R116383 Piston Pin Retainers AR65507 M41029 |
| Main Bearing | RE65165 | Standard | |
| RE65911 | 0.010 Oversize | ||
| Thrust Bearing | RE65168 | Standard | |
| RE65912 | 0.010 Oversize | ||
| Con Rod Bearings | RE65908 | Standard | |
| RE65909 | 0.010 Oversize | ||
| John Deere Crankshaft Kit | Front Seal | RE505515 | 1 Piece Unitized Seal and Wearsleeve; Replaces RE59810, RE538097. |
| Rear Seal | RE44574 | ||
| Crankshaft | RE50618 | ||
| Ring Gear | R28811 | 129 teeth | |
| OR | |||
| R114282 | 142 teeth | ||
| Seal | H35244 | ||
| John Deere Gasket Set | O/H Gasket Set | RE501455 | |
| Head Gasket Set | RE66082 | ||
| Head Gasket | R116515 | ||
| Oil Pan Gasket | R123352 | Use with Oil Pan Code 1901, 1902 & 1903, for Steel Oil Pan. | |
| R97342 (R123353) |
Use with Oil Pan Code 1904 & 1905, for Aluminum Oil Pan. | ||
| Rocker Cover Gasket | R123542 | ||
| John Deere Con Rods Parts | Con Rod Bush | R123960 | x4 |
| Con Rod Bolt | R114083 R501124 |
x8 Use R114083 Rod Bolts with Machine Split Connecting Rods, and use R501124 Rod Bolts with Fractured Split Connecting Rods. | |
| Bal. Shaft Bush | R115299 | x6 | |
| Camshaft Bush | R119874 | x1 Threaded type. | |
| Camshaft | RE56375 | (m) R135439, R132324, R134213 | |
| Bal. Shaft R/H | RE500448 | ||
| Bal. Shaft L/H | RE500449 | ||
| Cyl. Hd Cap Screw | R85363 | x18 Replace all R78558 Cap Screws with Flanged Head Cap Screw R85363. | |
| Tappet | R123565 | x8 | |
| Tensioner Belt | RE518097 | ||
| Con Rod | RE500002 | (m R500,000) | |
| John Deere Oil Pump Parts | Water Pump | RE500737 | Standard Flow |
| RE500734 | High Flow | ||
| Water Pump Cov | RE508566 | ||
| Water Pump Gsk | R123417 | ||
| Oil Pump | RE504914 | ||
| John Deere Valve Train Parts | Intake Valve | R98062 | Standard |
| R97490 | 0.015 oversize | ||
| Exhaust Valve | R90692 | Standard | |
| R97492 | 0.015 oversize | ||
| Intake Valve Insert | R98063 | Standard | |
| R98335 | O/S | ||
| Exhaust Valve Insert | R85687 | Standard | |
| R93910 | |||
| Valve Seal | RE31617 | ||
| Valve Lock | R91889 | ||
| Spring Valve | R26125 | ||
| Rotator Valve | RE60005 | ||
| Other John Deere Engine Parts | Thermostat | RE64354 | 180oF |
| Fuel Transfer Pump | RE68345 | ||
| OR | |||
| RE66513 | Line connections are both threaded. | ||
| Injector Pencil | RE60062 | Non Turbo | |
| RE48786 | Turbo | ||
| RE534136 | Use with Stanadybe DE10 Injection Pump. | ||
| Seal | R92352 | ||
| R48000 | |||
-
John Deere Parts for 4045T(4.5T) Engine
Notes. The 4045T(4.5T) engine is part of the Powertech Series John Deere Engines. This is a 4 cylinder engine, with a bore of 4.19 inches (106.5 mm), and a piston pin diameter of 1.375 inches (35 mm).
The piston will have casting numbers of RE59277 or RE505100, and the connecting rods will have casting numbers of R123959 or R500000.
This engine is found on John Deere 3410, 3410X, 4890, 4895, 5415, 5425, 5425N, 5510, 5510N, 5520, 5520N, 5525, 5525N, 5615, 5625, 5625N, 5715, 5725, 6700 Tractors, the OEM 4.5 L engines used in power units and marine engines, the 230 excavator, 310E, 310G, 310SE, 310SG, 315SE, 315SG, 410E, 410G, 410J, loader backhoe, the 344H Wheel Loader, and the 450H, 550H, and 650H crawler dozer.Major Part Description Sub Component Description Part Number Part Contents and Description John Deere Engine Overhaul Kits Complete Engine Overhaul Kit RE66093
RE66093AComes with Pistons, Pins, Pin Retainers, Rings, Liners, Liner O Rings, Cam Shaft bushings, Main Bearings, Thrust Bearings, Con Rod Bearings, Rear & Front Crank Seal, Complete Gasket Set, cap screws and injector grommets.
(*)(*)w/C. Rod R500000In frame Overhaul Kit IK66093
IK66093AComes with Pistons, Pins, Pin Retainers, Rings, Liners, Liner O Rings, Main Bearings, Thrust Bearings, Con Rod Bearings, head gasket set, oil pan gasket & cap screws.
(*)(*)w/C. Rod 500000John Deere Engine Parts Piston Liner Kit RE507920
(RE505111)Consists of
Pistons RE59277
Rings RE66271
Piston Pins R123178
Liners R116383
Piston Pin Retainers AR65507
M41029Main Bearing RE65165 Standard RE65911 0.010 Oversize Thrust Bearing RE65168 Standard RE65912 0.010 Oversize Con Rod Bearings RE65908 Standard RE65909 0.010 Oversize John Deere Crankshaft Kit Front Seal RE505515 1 Piece Unitized Seal and Wearsleeve; Replaces RE59810, RE538097. Rear Seal RE44574 Crankshaft RE50618 Ring Gear R28811 129 teeth OR R114282 142 teeth Seal H35244 John Deere Gasket Set O/H Gasket Set RE501455 Head Gasket Set RE66082 Head Gasket R116515 Oil Pan Gasket R123352 Use with Oil Pan Code 1901, 1902 & 1903, for Steel Oil Pan. R97342
(R123353)Use with Oil Pan Code 1904 & 1905, for Aluminum Oil Pan. Rocker Cover Gasket R123542 John Deere Con Rods Parts Con Rod Bush R123960 x4 Con Rod Bolt R114083
R501124x8 Use R114083 Rod Bolts with Machine Split Connecting Rods, and use R501124 Rod Bolts with Fractured Split Connecting Rods. Bal. Shaft Bush R115299 x6 Camshaft Bush R119874 x1 Threaded type. Camshaft RE56375 (m) R135439, R132324, R134213 Bal. Shaft R/H RE500448 Bal. Shaft L/H RE500449 Cyl. Hd Cap Screw R85363 x18 Replace all R78558 Cap Screws with Flanged Head Cap Screw R85363. Tappet R123565 x8 Tensioner Belt RE518097 Con Rod RE500002 (m R500,000) John Deere Oil Pump Parts Water Pump RE500737 Standard Flow RE500734 High Flow Water Pump Cov RE508566 Water Pump Gsk R123417 Oil Pump RE504914 John Deere Valve Train Parts Intake Valve R98062 Standard R97490 0.015 oversize Exhaust Valve R90692 Standard R97492 0.015 oversize Intake Valve Insert R98063 Standard R98335 O/S Exhaust Valve Insert R85687 Standard R93910 Valve Seal RE31617 Valve Lock R91889 Spring Valve R26125 Rotator Valve RE60005 Other John Deere Engine Parts Thermostat RE64354 180oF Fuel Transfer Pump RE68345 OR RE66513 Line connections are both threaded. Injector Pencil RE60062 Non Turbo RE48786 Turbo RE534136 Use with Stanadybe DE10 Injection Pump. Seal R92352 R48000
John Deere Parts for 4045T/H(4.5T/H) Engine
| Notes. The 4045T/H(4.5T/H) engine is part of the Powertech Series John Deere Engines. This is a 4 cylinder engine, with a bore of 4.19 inches (106.5 mm), and a piston pin diameter of 1.62 inches (41 mm). The piston will have casting numbers of RE55512 and RE505102, and the connecting rods will have casting numbers of R114081 or R500335. This engine is found on John Deere 6010, 6110, 6110L, 6210, 6210L, 6310, 6310S, 6310L, 6405, 6410, 6410L, 6410S, 6510L, 6610S, 6605 and 6610 Tractors, the OEM 4.5 L engines used in power units and marine engines, the 120 excavator, 444H, HCL, TC444H, wheel loader, 450G, 455G, 550H, 550G, 555G, 650G crawler dozer. |
|||
| Major Part Description | Sub Component Description | Part Number | Part Contents and Description |
| John Deere Engine Overhaul Kits | Complete Engine Overhaul Kit | RE66094 RE66094A |
Comes with Pistons, Pins, Pin Retainers, Rings, Liners, Liner O Rings, Cam Shaft bushings, Main Bearings, Thrust Bearings, Con Rod Bearings, Rear & Front Crank Seal, Complete Gasket Set, cap screws and injector grommets. (*)(*)w/C. Rod R500335 |
| In frame Overhaul Kit | IK66094 IK66094A |
Comes with Pistons, Pins, Pin Retainers, Rings, Liners, Liner O Rings, Main Bearings, Thrust Bearings, Con Rod Bearings, head gasket set, oil pan gasket & cap screws. (*)(*)w/C. Rod 500335 |
|
| John Deere Engine Parts | Piston Liner Kit | RE507850 (RE505112) |
Consists of Pistons RE55512 Rings RE66820 Piston Pins R123177 Liners R116383 Piston Pin Retainers AR65507 R54114 |
| Main Bearing | RE65165 | Standard | |
| RE65911 | 0.010 Oversize | ||
| Thrust Bearing | RE65168 | Standard | |
| RE65912 | 0.010 Oversize | ||
| Con Rod Bearings | RE65908 | Standard | |
| RE65909 | 0.010 Oversize | ||
| John Deere Crankshaft Kit | Front Seal | RE505515 | 1 Piece Unitized Seal and Wearsleeve; Replaces RE59810, RE538097. |
| Rear Seal | RE44574 | ||
| Crankshaft | RE50618 | ||
| Ring Gear | R28811 | 129 teeth | |
| OR | |||
| R114282 | 142 teeth | ||
| Seal | H35244 | ||
| John Deere Gasket Set | O/H Gasket Set | RE501455 | |
| Head Gasket Set | RE66082 | ||
| Head Gasket | R116515 | ||
| Oil Pan Gasket | R123352 | Use with Oil Pan Code 1901, 1902 & 1903, for Steel Oil Pan. | |
| R97342 (R123353) |
Use with Oil Pan Code 1904 & 1905, for Aluminum Oil Pan. | ||
| Rocker Cover Gasket | R123542 | ||
| John Deere Con Rods Parts | Con Rod Bush | R114082 | x4 |
| Con Rod Bolt | R114083 R501124 |
x8 Use R114083 Rod Bolts with Machine Split Connecting Rods, and use R501124 Rod Bolts with Fractured Split Connecting Rods. | |
| Bal. Shaft Bush | R115299 | x6 | |
| Camshaft Bush | R119874 | x1 Threaded type. | |
| Camshaft | RE56375 | (m) R135439, R132324, R134213 | |
| Bal. Shaft R/H | RE500448 | ||
| Bal. Shaft L/H | RE500449 | ||
| Cyl. Hd Cap Screw | R85363 | x18 Replace all R78558 Cap Screws with Flanged Head Cap Screw R85363. | |
| Tappet | R123565 | x8 | |
| Tensioner Belt | RE518097 | ||
| Con Rod | RE500608 | (m R500,335) | |
| John Deere Oil Pump Parts | Water Pump | RE500737 | Standard Flow |
| RE500734 | High Flow | ||
| Water Pump Cov | RE508566 | ||
| Water Pump Gsk | R123417 | ||
| Oil Pump | RE504914 | ||
| John Deere Valve Train Parts | Intake Valve | R98062 | Standard |
| R97490 | 0.015 oversize | ||
| Exhaust Valve | R90692 | Standard | |
| R97492 | 0.015 oversize | ||
| Intake Valve Insert | R98063 | Standard | |
| R98335 | O/S | ||
| Exhaust Valve Insert | R85687 | Standard | |
| R93910 | O/S | ||
| Valve Seal | RE31617 | ||
| Valve Lock | R91889 | ||
| Spring Valve | R26125 | ||
| Rotator Valve | RE60005 | ||
| Other John Deere Engine Parts | Thermostat | RE64354 | 180oF |
| Fuel Transfer Pump | RE68345 | ||
| OR | |||
| RE66513 | Line connections are both threaded. | ||
| Injector Pencil | RE60062 | Non Turbo | |
| RE48786 | Turbo | ||
| RE534136 | Use with Stanadybe DE10 Injection Pump. | ||
| Seal | R92352 | ||
| R48000 | |||
John Deere Parts for Engines:-Engine Overhaul Kits| Crankshafts | Injectors| Cylinder Head | Water Pump | Valve Train Kit | Oil Pump | Gasket Sets
Attention: Farmers & Mechanics!!!Need John Deere 3029 Engine Parts?
You Can Benefit from:
- The Largest Online New Aftermarket Parts Store in the USA-95,000 part numbers and growing
- Seeing Pictures, Prices, Descriptions, and Availability before you buy
- Paying Up to 50% less that Dealer Prices
- The lowest freight rates from UPS, DHL, and other couriers. Use The Part Numbers Below and Enter It Into the Online Shopping Cart to See Prices or Call Easy Tractor Parts 1-877-668-7278 or John Deere Parts Catalog
John Deere Parts for 3029(2.9D) Engine for Engine Serial Number Less Than (<)252768Notes. The 3029(2.9D) engine is a 3 cylinder engine thats part of the PowerTech engines manufactured by John Deere. For serial numbers more than 252768, the bore will be 4.19 inches (106.5 mm), and a piston pin diameter of 1.3 inches (32 mm).The pistons will have casting numbers of RE61467 or RE500210. This engine is found on John Deere 3100, 5105, 5200, 5205, 5210, 5220, 5300, 5310 and 5310N Tractors, OEM 2.9L engines, and the 240 Skid Steer Major Part Description Sub Component Description Part Number Part Contents and Description John Deere Engine Overhaul Kits Complete Engine Overhaul Kit OK2.9D9 Comes with Pistons, Pins, Pin Retainers, Rings, Liners, Liner O Rings, Cam Shaft bushings, Main Bearings, Thrust Bearings, Con Rod Bearings, Rear & Front Crank Seal, Complete Gasket Set, cap screws and injector grommets. In frame Overhaul Kit IK2.9D9 Comes with Pistons, Pins, Pin Retainers, Rings, Liners, Liner O Rings, Main Bearings, Thrust Bearings, Con Rod Bearings, head gasket set, oil pan gasket & cap screws. John Deere Engine Parts Piston Liner Kit RE66968 Consists of
Pistons RE61467
Rings RE66271
Liners R116281
Piston Pin Retainers AR65507Main Bearing RE27352 Standard RE27353 0.010 Oversize RE27360 0.020 Oversize RE27368 0.030 Oversize Thrust Bearing AT21139 Standard AT21132 0.010 Oversize AT21134 0.020 Oversize AT21136 0.030 Oversize Con Rod Bearings RE27348 Standard RE27349 0.010 Oversize RE27358 0.020 Oversize RE27364 0.030 Oversize John Deere Crankshaft Kit Front Seal AR67942 Rear Seal RE44574 Crankshaft RE50979 Crankshaft Gear T20094 Replace all R78558 Cap Screws with Flanged head Cap Screw R85363. Ring Gear R28811 129 teeth OR R114282 142 teeth Sleeve Front R81989 Packing Sleeve H35244 John Deere Gasket Set O/H Gasket Set RE501578 Head Gasket Set RE38850 Head Gasket R97356 Oil Pan Gasket R97341 Rocker Cover Gasket R106796 John Deere Con Rods Parts Con Rod Bush R504300 x3 Con Rod Bolt R80033 x6 John Deere Oil Pump Parts Oil Pump RE55343 Some Engines Models may use High Capacity Pump, Oil RE65580. Oil Cooler RE61767 Rocker Arm RE31973 (Intake/Exhaust) Rocker Arm Shaft R54985 Cyl Hd Cap Screw R85363 x14 Replace all R78558 Cap Screws with Flanged Head Cap Screw R85363. John Deere Engine Gears Lower Gear AT24252 Helicoidal Gears Lower Bushing T26321 Upper Gear AT18009 Helicoidal Gears Upper Bushing T20034 Cam Follower T20073 Cam Gear T20070 Helicoidal Gears John Deere Valve Train Parts Intake Valve R98062 Standard R97490 0.015 oversize Exhaust Valve R90692 Standard R97492 0.015 oversize Intake Valve Insert R106831 Exhaust Valve Insert R106829 Valve Seal RE31617 Valve Lock R91889 Spring Valve R26125 Rotator Valve RE60005 Other John Deere Engine Parts Thermostat RE64354 180oF Fuel Transfer Pump RE38009 Water Pump Repair Kit See Chart Water pump Kit has no Impeller See Chart Water Pump Kit has Impeller Water Pump AR97708 (m) R73604 RE60489 (m) R100812, (m) R127337
(m) R127918, (m) R55164Injector Pencil RE36936 Seal Kit RE65201 John Deere Parts for 3029(2.9T) Engine for Engine Serial Number Less Than 258847
| Notes. The 3029(2.9T) engine is a 3 cylinder engine thats part of the PowerTech engines manufactured by John Deere. For serial numbers less than 252767, the bore will be 4.19 inches (106.5 mm), and a piston pin diameter of 1.3 inches (32 mm).The pistons will have casting numbers of RE61270. This engine is found on John Deere 5400 (<261581) and 5400N Tractors, OEM 2.9L engines, and the 8875 Skid Steer | |||
| Major Part Description | Sub Component Description | Part Number | Part Contents and Description |
| John Deere Engine Overhaul Kits | Complete Engine Overhaul Kit | OK2.9T2 | Comes with Pistons, Pins, Pin Retainers, Rings, Liners, Liner O Rings, Cam Shaft bushings, Main Bearings, Thrust Bearings, Con Rod Bearings, Rear & Front Crank Seal, Complete Gasket Set, cap screws and injector grommets. |
| In frame Overhaul Kit | IK2.9T2 | Comes with Pistons, Pins, Pin Retainers, Rings, Liners, Liner O Rings, Main Bearings, Thrust Bearings, Con Rod Bearings, head gasket set, oil pan gasket & cap screws. | |
| John Deere Engine Parts | Piston Liner Kit | RE67426 | Consists of Pistons RE61270 Rings RE66271 Piston Pins TMX3915 Liners R116281 Piston Pin Retainers AR65507 R54114 |
| Main Bearing | RE27352 | Standard | |
| RE27353 | 0.010 Oversize | ||
| RE27360 | 0.020 Oversize | ||
| RE27368 | 0.030 Oversize | ||
| Thrust Bearing | AT21139 | Standard | |
| AT21132 | 0.010 Oversize | ||
| AT21134 | 0.020 Oversize | ||
| AT21136 | 0.030 Oversize | ||
| Con Rod Bearings | RE27348 | Standard | |
| RE27349 | 0.010 Oversize | ||
| RE27358 | 0.020 Oversize | ||
| RE27364 | 0.030 Oversize | ||
| John Deere Crankshaft Kit | Front Seal | AR67942 | |
| Rear Seal | RE44574 | ||
| Crankshaft | RE50979 | ||
| Crankshaft Gear | T20094 | ||
| Ring Gear | R28811 | 129 teeth | |
| OR | |||
| R114282 | 142 teeth | ||
| Sleeve Front | R81989 | ||
| Packing Sleeve | H35244 | ||
| John Deere Gasket Set | O/H Gasket Set | RE501578 | |
| Head Gasket Set | RE38850 | ||
| Head Gasket | R97356 | ||
| Oil Pan Gasket | R97341 | ||
| Rocker Cover Gasket | R106796 | ||
| John Deere Con Rods Parts | Con Rod Bush | R116817 | x3 |
| Con Rod Bolt | R80033 | x6 | |
| John Deere Oil Pump Parts | Oil Pump | RE55343 | |
| Oil Cooler | RE61767 | ||
| Rocker Arm | RE31973 | Intake/Exhaust | |
| Rocker Arm Shaft | R54985 | ||
| Cyl Hd Cap Screw | R85363 | x14 Replace all R78558 Cap Screws with Flanged Head Cap Screw R85363 | |
| John Deere Engine Gears | Lower Gear | AT24252 | Helicoidal Gears |
| Lower Bushing | T26321 | ||
| Upper Gear | AT18009 | Helicoidal Gears | |
| Upper Bushing | T20034 | ||
| Cam Follower | T20073 | ||
| Cam Gear | T20070 | Helicoidal Gears | |
| John Deere Valve Train Parts | Intake Valve | R98062 | Standard |
| R97490 | 0.015 oversize | ||
| Exhaust Valve | R90692 | Standard | |
| R97492 | 0.015 oversize | ||
| Intake Valve Insert | R106831 | Standard | |
| Exhaust Valve Insert | R106829 | Standard | |
| Valve Seal | RE31617 | ||
| Valve Lock | R91889 | ||
| Spring Valve | R26125 | ||
| Rotator Valve | RE60005 | ||
| Other John Deere Engine Parts | Thermostat | RE64354 | 180oF |
| Fuel Transfer Pump | RE38009 | ||
| Water Pump Repair Kit | See Chart | Water pump Kit has no Impeller | |
| See Chart | Water Pump Kit has Impeller | ||
| Water Pump | AR97708 | (m) R73604 | |
| Water Pump | RE60489 | (m) R100812, (m) R127337 (m) R127918, (m) R55164 |
|
| Injector Pencil | RE38087 | ||
| Seal Kit | RE64292 | ||