John Deere Parts for Engines:-Engine Overhaul Kits| Crankshafts | Injectors| Cylinder Head | Water Pump | Valve Train Kit | Oil Pump | Gasket Sets
Attention: Farmers & Mechanics!!!
Need John Deere 3164 Engine Parts?
You Can Benefit from:
- The Largest Online New Aftermarket Parts Store in the USA-95,000 part numbers and growing
- Seeing Pictures, Prices, Descriptions, and Availability before you buy
- Paying Up to 50% less that Dealer Prices
- The lowest freight rates from UPS, DHL, and other couriers.
Use The Part Numbers Below and Enter It Into the Online Shopping Cart to See Prices or Call Easy Tractor Parts 1-877-668-7278 or
Click the Image Below to Enter the
John Deere Parts CatalogJohn Deere Parts for 3164 Engine. O Rings on Liner. Small Pin Piston. Engine Serial Number less than (<) 179601
Notes. The 3164 engine is part of the 300 Series John Deere Engines manufactured in Saran, France and in Dubuque in Iowa, USA. For serial numbers less that 179601, the liner o rings are fixed on the liner. This is a 3 cylinder engine, with a bore of 4.02 inches (102 mm), and a piston pin diameter of 1.185 inches (30mm).
The connecting rods will have casting numbers of T20007 or R81410.
This engine is found on John Deere 1520 tractors, and the 302 and 302A industrial tractor.
Major Part Description Sub Component Description Part Number Part Contents and Description John Deere Engine Overhaul Kits Complete Engine Overhaul Kit OK3310 Comes with Pistons, Pins, Pin Retainers, Rings, Liners, Liner O Rings, Cam Shaft bushings, Main Bearings, Thrust Bearings, Con Rod Bearings, Rear & Front Crank Seal, Complete Gasket Set, cap screws and injector grommets. In frame Overhaul Kit IK3310 Comes with Pistons, Pins, Pin Retainers, Rings, Liners, Liner O Rings, Main Bearings, Thrust Bearings, Con Rod Bearings, head gasket set, oil pan gasket & cap screws. John Deere Engine Parts Piston Liner Kit PLK310 Consists of
Pistons AR78310
Rings AR55759
Piston Pins T26149
Liners AR51903
Piston Pin Retainers R51112Main Bearing RE27352 Standard RE27353 0.010 Oversize RE27360 0.020 Oversize RE27368 0.030 Oversize Thrust Bearing AT21139 Standard AT21132 0.010 Oversize AT21134 0.020 Oversize AT21136 0.030 Oversize Con Rod Bearings RE27348 Standard RE27349 0.010 Oversize RE27358 0.020 Oversize RE27364 0.030 Oversize John Deere Crankshaft Kit Front Seal AR67942 Rear Seal RE44574 Crankshaft AT18031 Crankshaft Gear T20094 Ring Gear R114282 142 teeth John Deere Gasket Set Overhaul Gasket Set RE501578 Head Gasket Set RE38850 Head Gasket R97356 Oil Pan Gasket R97341 Rocker Cover Gasket R75729 John Deere Con Rods Parts Con Rod Bush T23471 x3 Con Rod Bolt R74194 x6 (Use R74194 with con rod casting # T20007, use R80033 with con rod casting # R81410) Con Rod AT18005 John Deere Oil Pump Parts Oil Pump RE55343 Oil Cooler RE31929 Conversion Kit available. Part # MX386 Consists of T31306 x1 Nipple R99802 x2 Hose Rocker Arm RE31973 Rocker Shaft R54985 Oil Pump Tube R113752 John Deere Engine Gears Lower Gear AT24252 Lower Bushing T26321 Upper Gear AT18009 Upper Bushing T20034 Cam Follower T20073 Cam Gear T20070 John Deere Valve Train Parts Intake Valve R79623 Standard R79628 0.003 Oversize R79629 0.015 oversize Exhaust Valve R79624 Standard R79625 0.003 Oversize R79626 0.015 oversize Intake Valve Insert R73064 Standard Exhaust Valve Insert R51734 Standard Valve Cap R20129 Valve Lock R20077 Valve Spring R26125 Valve Rotator RE11410 Valve Seal (O Ring) R87627 Other John Deere Engine Parts Thermostat RE33705 180oF (Do no use this thermostat with a housing that has the following casting #’s R70741, R74549) Thermostat Cover T23620 Fuel Transfer Pump RE42211 Water Pump Repair Kit RE19507 Water pump Kit has no Impeller RE62658 Water Pump Kit has Impeller Water Pump AT27018 (marked) R48997 or R51039 Injectors AR89564 Injector Seals R60746 R48000 John Deere Parts for 3164 Engine. O Rings on Block. Small Pin Piston. Engine Serial Number less than (<) 179601
Notes. The 3164 engine is part of the 300 Series John Deere Engines manufactured in Saran, France and in Dubuque in Iowa, USA.For serial numbers more that 179601, the liner o rings are fixed in the engine block. This is a 3 cylinder engine, with a bore of 4.02 inches (102mm), and a piston pin diameter of 1.185 inches (30mm).The connecting rods will have casting numbers of T20007 or R81410.
This engine is found on John Deere 1420,1520, and the 1530 Tractors, and the 350B dozer. |
|||
Major Part Description | Sub Component Description | Part Number | Part Contents and Description |
John Deere Engine Overhaul Kits | Complete Engine Overhaul Kit | OK3593 | Comes with Pistons, Pins, Pin Retainers, Rings, Liners, Liner O Rings, Cam Shaft bushings, Main Bearings, Thrust Bearings, Con Rod Bearings, Rear & Front Crank Seal, Complete Gasket Set, cap screws and injector grommets. |
In frame Overhaul Kit | IK3593 | Comes with Pistons, Pins, Pin Retainers, Rings, Liners, Liner O Rings, Main Bearings, Thrust Bearings, Con Rod Bearings, head gasket set, oil pan gasket & cap screws. | |
John Deere Engine Parts | Piston Liner Kit | AR71593 | Consists of Pistons AR78310 Rings AR55759 Piston Pins T26149 Liners R116463 Liner O Rings AR71618 Piston Pin Retainers R51112 |
Main Bearing | RE27352 | Standard | |
RE27353 | 0.010 Oversize | ||
RE27360 | 0.020 Oversize | ||
RE27368 | 0.030 Oversize | ||
Thrust Bearing | AT21139 | Standard | |
AT21132 | 0.010 Oversize | ||
AT21134 | 0.020 Oversize | ||
AT21136 | 0.030 Oversize | ||
Con Rod Bearing | RE27348 | Standard | |
RE27349 | 0.010 Oversize | ||
RE27358 | 0.020 Oversize | ||
RE27364 | 0.030 Oversize | ||
John Deere Crankshaft Kit | Front Seal | AR67942 | |
Rear Seal | RE44574 | Do no use with Flywheel Housing with casting # T20300 & T22991 | |
Crankshaft | AT18031 | ||
Crankshaft Gear | T22094 | ||
Ring Gear | R114282 | 142 teeth | |
John Deere Gasket Set | Overhaul Gasket Set | RE501578 | |
Head Gasket Set | RE38850 | ||
Head Gasket | R97356 | ||
Oil Pan Gasket | R97341 | ||
Rocker Cover Gasket | R75729 | ||
John Deere Con Rods Parts | Con Rod Bush | T23471 | x3 |
Con Rod Bolt | R74194 | x6 (Use R74194 with con rod casting # T20007, use R80033 with con rod casting # R81410) | |
Con Rod | AT18005 | ||
John Deere Oil Pump Parts | Oil Pump | RE55343 | |
Oil Cooler | RE31929 | Conversion Kit available. Part # MX386 Consists T31306 x1 Nipple R99802 x2 Hose | |
Rocker Arm | RE31973 | ||
Rocker Shaft | R54985 | ||
Oil Pump Tube | R113752 | ||
John Deere Engine Gears | Lower Gear | AT24252 | |
Lower Bushing | T26321 | ||
Upper Gear | AT18009 | ||
Upper Bushing | T20034 | ||
Cam Follower | T20073 | ||
Cam Gear | T20070 | ||
John Deere Valve Train Parts | Intake Valve | R79623 | Standard |
R79628 | 0.003 Oversize | ||
R79629 | 0.015 oversize | ||
Exhaust Valve | R79624 | Standard | |
R79625 | 0.003 Oversize | ||
R79626 | 0.015 oversize | ||
Intake Valve Insert | R73064 | Standard | |
Exhaust Valve Insert | R51734 | Standard | |
Valve Cap | R20129 | ||
Valve Lock | R20077 | ||
Valve Spring | R26125 | ||
Valve Rotator | RE11410 | ||
Valve Seal (O Ring) | R87627 | ||
Other John Deere Engine Parts | Thermostat | RE33705 | 180oF Do no use this thermostat with a housing that has the following casting #’s R70741, R74549 |
Thermostat Cover | T23620 | ||
Fuel Transfer Pump | RE42211 | ||
Water Pump Repair Kit | RE19507 | Water pump Kit has no Impeller | |
RE62658 | Water Pump Kit has Impeller | ||
Water Pump | AT27018 | (m) R48997 (m)R51039 | |
Injectors | AR89564 | ||
Injector Seals | R60746 | ||
R48000 |
John Deere Parts for 3164 Engine. O Rings on Block. Large Pin Piston .Engine Serial Number more than (>) 179602
Notes. The 3164 engine is part of the 300 Series John Deere Engines manufactured in Saran, France and in Dubuque in Iowa, USA.For serial numbers more that 179602, the liner o rings are fixed in the engine block. This is a 3 cylinder engine, with a bore of 4.02 inches (102 mm), and a piston pin diameter of 1.375 inches (35mm).This engine is found on John Deere 1530, 2040, and the 2330 Tractors, and the 301A, 302, 302A, 310 Industrial tractors, the 350B, 350C and the 350D dozer. | |||
Major Part Description | Sub Component Description | Part Number | Part Contents and Description |
John Deere Engine Overhaul Kits | Complete Engine Overhaul Kit | OK3041 | Comes with Pistons, Pins, Pin Retainers, Rings, Liners, Liner O Rings, Cam Shaft bushings, Main Bearings, Thrust Bearings, Con Rod Bearings, Rear & Front Crank Seal, Complete Gasket Set, cap screws and injector grommets. |
In frame Overhaul Kit | IK3041 | Comes with Pistons, Pins, Pin Retainers, Rings, Liners, Liner O Rings, Main Bearings, Thrust Bearings, Con Rod Bearings, head gasket set, oil pan gasket & cap screws. | |
John Deere Engine Parts | Piston Liner Kit | AR78041 | Consists of Pistons AR77762 Rings AR55759 Piston Pins R125754 Liners R116463 Liner O Rings AR71618 Piston Pin Retainers M41029 |
Main Bearing | RE27352 | Standard | |
RE27353 | 0.010 Oversize | ||
RE27360 | 0.020 Oversize | ||
RE27368 | 0.030 Oversize | ||
Thrust Bearing | AT21139 | Standard | |
AT21132 | 0.010 Oversize | ||
AT21134 | 0.020 Oversize | ||
AT21136 | 0.030 Oversize | ||
Con Rod Bearing | RE27348 | Standard | |
RE27349 | 0.010 Oversize | ||
RE27358 | 0.020 Oversize | ||
RE27364 | 0.030 Oversize | ||
John Deere Crankshaft Kit | Front Seal | AR67942 | |
Rear Seal | RE44574 | ||
Crankshaft | AT18031 | ||
Crankshaft Gear | T22094 | ||
Ring Gear | R114282 | 142 teeth | |
John Deere Gasket Set | Overhaul Gasket Set | RE501578 | |
Head Gasket Set | RE38850 | ||
Head Gasket | R97356 | ||
Oil Pan Gasket | R97341 | ||
Rocker Cover Gasket | R75729 | ||
John Deere Con Rods Parts | Con Rod Bush | R55647 | x3 |
Con Rod Bolt | R74194 | x6 (Use R74194 with con rod casting # T20007, use R80033 with con rod casting # R81410) | |
Con Rod | RE16495 | For connecting Rods RE16495 and RE21076, use connecting Rod Bolt R80033 | |
John Deere Oil Pump Parts | Oil Pump | RE55343 | |
Oil Cooler | RE31929 | Conversion Kit available. Part # MX386 Consists T31306 x1 Nipple R99802 x2 Hose | |
Rocker Arm | RE31973 | ||
Rocker Shaft | R54985 | ||
Oil Pump Tube | R113752 | ||
John Deere Engine Gears | Lower Gear | AT24252 | |
Lower Bushing | T26321 | ||
Upper Gear | AT18009 | ||
Upper Bushing | T20034 | ||
Cam Follower | T20073 | ||
Cam Gear | T20070 | ||
John Deere Valve Train Parts | Intake Valve | R79623 | Standard |
R79628 | 0.003 Oversize | ||
R79629 | 0.015 oversize | ||
Exhaust Valve | R79624 | Standard | |
R79625 | 0.003 Oversize | ||
R79626 | 0.015 oversize | ||
Intake Valve Insert | R73064 | Standard | |
Exhaust Valve Insert | R51734 | Standard | |
Valve Cap | R20129 | ||
Valve Lock | R20077 | ||
Valve Spring | R26125 | ||
Valve Rotator | RE11410 | ||
Valve Seal (O Ring) | R87627 | ||
Other John Deere Engine Parts | Thermostat | RE33705 | 180oF Do no use this thermostat with a housing that has the following casting #’s R70741, R74549 |
Thermostat Cover | T23620 | ||
Fuel Transfer Pump | RE42211 | ||
Water Pump Repair Kit | RE19507 | Water pump Kit has no Impeller | |
RE62658 | Water Pump Kit has Impeller | ||
Water Pump | AT27018 | (m) R48997 (m)R51039 | |
Transmission Oil Pump | AL120106 | Verify P/N for your application | |
Seal | R60746 | ||
R48000 | |||
Injector Pencil | R89564 |